A-A-50468A
diameter and not less than 0.1084 (galvanized sheet gage No. 12) for sizes over 8 inches in diameter. Commercial tolerances shall apply to sheet metal thickness specified herein. Sheet steel thickness is specified in accordance with ASTM A 568 and galvanized sheet steel is specified in accordance with ASTM A 525.
Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product sold in the commercial market place. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this CID are met.
If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
Regulatory requirements. The offerer/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
Packaging. Unless otherwise specified in the contract or order, the preservation, packing, and marking shall be in accordance with ASTM D 3951.
Notes. Acquisition activity should specify the size of blast gate required.
ASTM Standards are available from ASTM, 1916 Race Street, Philadelphia, PA 19103.
FED-STD-376 is available from Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.
MILITARY INTERESTS:
Custodian
Navy - YD
Review Activity
DLA – CS
CIVIL AGENCY COORDINATING ACTIVITY:
GSA - FSS
PREPARING ACTIVITY:
Navy - YD
(Project 4460-0046)
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business