OO-B-2925 BAGHOUSE, REVERSE PULSE JET; FOR PACKAGED BOILERS FIRED ON COAL OR A COMBINATION OF COAL AND GAS, COAL AND OIL, OR COAL-GAS-OIL 2,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY NO S/S DOCUMENTThis specification covers reverse pulse jet baghouses, with induced draft fan, installed on packaged boilers fired by coal, coal and gas, coal and oil, or a combination of coal, oil and gas.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

OO-B-2925

6.3.2  Design verification.  The manufacturer should furnish data to verify compliance with the fan performance as specified in 3.7.3.

6.3.3  Foundations.  Packaged baghouses shipped assembled to the installation site should not be furnished with concrete foundations, but should be furnished with detailed construction drawings indicating the weight of the equipment and the anchor bolt pattern required (see 3.9.1).

6.3.4  Induced draft fan design.  Fan capacity should be verified by manufacturer's fan performance curves (see 3.7.3).

6.3.5  Technical manuals.  The manufacturer should provide three commercial technical manuals normally prepared and supplied with the baghouse and related equipment.

6.4  Supersession data.  This specification replaces military specification MIL-B-28685 dated

9 August 1990.

6.5  Part or Identifying Numbers (PINs). The specification number is used to form the PIN for the baghouse unit covered by this document (see 1.2).  PINs for the baghouse units are established as follows:

OO-B-2925

Federal Specification No.          

6.6  Subject term (key word) listing.

Gas fired

Hot water generator

Oil fired

MILITARY INTERESTS:                            CIVIL AGENCY COORDINATION ACTIVITY:

Custodians: Navy - YD1

Air Force - 99

Review Activities: Navy - MC

Air Force - 84

GSA-FSS

Preparing Activity: Navy - YD1

Project (4460-0065)

13

Source:  https://assist.dla.mil  --  Downloaded: 

Check  the  source  to  verify  that  this  is  the  current  version  before  use.